Recharging the Batteries
Product Reference Guide
A-5
Figure A-4. Charging the Main Battery in the Charging Slot
4. Attach the small, round plug of the 9-volt power adapter to the round
power input jack on the 9-pin connector at the end of the Dock's cable.
5. Plug the power adapter into a wall outlet or a power strip. The LED on
the left front of the Dock will be red while it is powered.
Using the PT40 Dock (PT40 Unit)
To recharge the PT40 using the PT40 Dock, leave the main battery in the
PT40 and complete the following steps as shown in
:
1. If the PT40 is on, turn it off.
2. Place the PT40 into the docking space in the PT40 Dock.
3. Attach the small, round plug of the 9-volt power adapter to the round
power input jack on the 9-pin connector at the end of the Dock's cable
as shown in
Step 3
If the PT40 remains in the dock for an extended period of time, the charger in the PT40
will cycle (several hours per cycle) between charged (green LED) and charging (red
LED) to keep the battery topped off.
2340.book Page 5 Wednesday, January 29, 2003 12:50 PM