PSC Falcon PT40 Product Reference Manual Download Page 111

Page: 111 / 122

Product Reference Guide

G-1

Appendix G

Maintenance,

Troubleshooting, and

Technical Support

Overview

This section of the manual contains material on the following topics:

•

Maintaining your Falcon PT40 starting on page G-1

•

Troubleshooting starting on page G-2

•

Technical Support starting on page G-3

Maintaining your Falcon PT40

With normal use, the Falcon PDT, Dock, and battery chargers require no
maintenance. For trouble-free service, observe the following tips when using
the PT40:

•

To prolong its life and avoid problems, keep the Falcon clean. Use a
clean, soft cloth dampened with a mild, dilute cleanser.

•

If you need to clean the Falcon’s display, clean it with a lens cloth or
other soft cloth dampened with a mild, dilute cleaning solution.

Do not scratch the PT40’s screen.

Do not drop the PT40 or subject it to strong impact.

Do not immerse the Falcon PT40, docks, or battery chargers in liquid.

Do not use abrasive paper, cloth, or abrasive or corrosive cleaners to clean the PT40.

2340.book Page 1 Wednesday, January 29, 2003 12:50 PM

Summary of Contents for Falcon PT40



























































































































Search results

Summary of Contents for Falcon PT40

Reviews:

Related manuals for Falcon PT40

Brands by name

Popular brands

PSC Falcon PT40, Product Reference Manual

Search results

Summary of Contents for Falcon PT40

Reviews:

Related manuals for Falcon PT40

Brands by name

Popular brands