PS Engineering PAC45D, System Installation And Operation Manual

Page: 23 / 47

PS Engineering
PAC45 Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-045-0100 Page 2-13 January 2020
P453 P454
1 NC 1 PA KEY
2 NC 2 COPILOT CVR/Low Level
SPR out (-0103 only)
3 PAX 5 ICS PTT 3 PAX 6 ICS PTT
4 PAX1 ICS PTT 4 NC
5 PAX2 ICS PTT 5 NC
6 PAX3 ICS PTT 6 NC
7 PAX4 ICS PTT 7 TEL MIC AUD
8 NC 8 SWAP
9 PAX 1 MIC KEY 9 ACKNOWLEDGE
10 SERIAL TX3 - 10 COPILOT HP RT
11 SERIAL RX2 - 11 PILOT HP RT
12 SERIAL RX2 + 12 PILOT CVR OUT
13 PAX 1 HP RT 13 UNSW 4 AUD IN
14 PAX 2 HP RT 14 UNSW 3 AUD IN
15 PAX 3 HP RT 15 NC
16 PAX 4 HP RT 16 PAX 5 MIC AUD
17 NC 17 TEL AUD IN
18 NC 18 REMOTE ISO
19 SERIAL TX3+ 19 COPILOT HP LOW
20 SERIAL RX3- 20 PILOT HP LOW
21 SERIAL RX3+ 21 CVR LOW
22 SERIAL 2 LOW 22 UNSW 4 AUD LOW
23 PAX HP LOW 23 UNSW 3 LOW
24 SERIAL 2 LOW 24 NC
25 PAX HP LOW 25 PAX 5 MIC AUD LOW
26 NC 26 TEL AUD LOW
Table 2-3: PAC45D Pin Assignments
NOTE: Serial TX 3 for Mission Observer Control Head
2.7 Wiring Checkout
After wiring is complete, verify power is ONLY on pin 16 &17 of J451and airframe ground on pin
34. Failure to do so will cause serious internal damage and void PS Engineering's warranty.
PRELIMINARY