7.2.16 Safety timer
This feature turns off the nozzle and bed heaters if the printer is idle for more than 30
minutes.
7.2.17 Beeper settings
There are 4 levels of acoustic signalization:
Loud, Once, Silent and Assist.
The user is
able to choose between each level in the printer's
LCD Menu -> Settings –> Sound.
You
can also change the sound settings during the print in the
LCD Menu -> Tune.
Level description:
●
Loud
- printer uses acoustic signalization for failure or if confirmation is needed
●
Once
- this level is similar to Loud, but all beeps are played only once
●
Silent
- most of the beeps are muted, the user is informed only in case of a serious
error
●
Assist
- accessibility feature which plays a different sound while scrolling through the
menu and at the end of the menu
7.2.18 Language settings
The following languages are supported: English, Czech, German, Spanish, Italian, Polish
and French. Go to the printer’s
LCD Menu - Settings - Language
and select any of the
available languages. In addition to the officially supported languages, you can also select
any of the community made translations from the
LCD Menu - Settings - Language -
Community made
submenu.
To flash firmware including the translations, you need to use PrusaSlicer’s built-in firmware
flasher. Please refer to chapter
13.9 Updating printer firmware
7.2.19 Dump memory
The "Dump memory" feature is a debugging support tool. It allows you to store the RAM
content into the xFlash memory for further issue/bug analysis. If you report a bug to our
GitHub repository, our developers might ask you to use this feature to better understand the
cause of the problem.
41
