Prozone CSS 12, Manual

Page: 7 / 18

7
Specifications:
2.1 Installation Guidelines
◊ The CSS 12 must be correctly installed or your system may not work properly and the warranty will be voided.
◊ The CSS 12 should be installed on residential pools only.
◊ A qualified swimming pool professional and certified electrician must install the CSS 12.
2.2 Verify Contents
Verify that you have the following parts prior to starting installation. (For assistance, contact Prozone Customer Service at 256-539-4570)
Z36 Installation Kit (For existing pool installation)
Refer to this list when ordering replacement parts
CSS 12
Power Requirements Dual Voltage
90 - 270VAC/50/60Hz
Operating Temperature Air: 25°F to 140°F
Water: 59°F to 110°F
Ozone Specifications .4g/hr @ 110°F @ 60% RH
Salinity PPM 1500 to 4000 PPM
2500 PPM nominal
Chlorinator Production 20 g/hr = 1 lb/day
Pool Capacity 30,000 Gallons
Water Flow Rate 1 to 12 gpm
Dimension Specifications 15” X 10” X 6.5”
20 lbs.
CSS 12
Section 2 Product Installation
Section 1 Product Information
Z43 Installation Kit (For new pool installation)
Refer to this list when ordering replacement parts
Description Part Number Quantity
Strainer 20975 1
Fitting, PVC, ¾” MPT x ¾” MHT 20580 2
Close Nipple ¾” 20247 1
Metal Clamp 1-¼” 20067 7
Polybraid Hose ¾” 201641 120”
Fitting, PVC, ¾” FHT x ½” SL, swivel 201605 5
Fitting, PVC, ¾” SP x ¾” HB 201140 7
Clear Hose ¾” 20264 36”
Ball Valve, ¾” 201159 1
Flow Meter w/1/4” CVT, 0-10 SCFH 600192 1
Fitting, PVC, 2”SP x 1-½”SL 201114 4
Tee, PVC, 2”SL x ¾”FPT 201095 2
฀
Description Part Number Quantity
Strainer 20975 1
Fitting, PVC, ¾” MPT x ½” SL 201660 1
Fitting, PVC, ¾” MPT x ¾” MHT 20580 1
Fitting, PVC, ¾” MHT x ½” SL 202153 1
Fitting, PVC, ¾” FHT x ½” SL, swivel 201605 5
Fitting, PVC, ¾” SP x ¾” HB 201140 7
PVC Pipe ½” x 3” 20314 2
Metal Clamp 1-¼” 20067 7
Flow Meter w/1/4” CVT, 0-10 SCFH 600192 1
Polybraid Hose ¾” 201641 120”
Clear Hose ¾” 20264 36”
Ball Valve, ¾” 201159 1
Saddle Clamp, Outer Top 201155-4 2
Saddle Clamp, Outer Bottom 201155 2
Saddle Clamp, Inner Top 201155-2 2
Saddle Clamp, Inner Bottom 201155-3 2
Saddle Clamp Gasket 400076 2
Saddle Clamp Bushing 201155-5 2
Screw #14 x 1-½” PPMS 201863 4
Nut ¼-20 20703 4
฀