background image

6

◊  Complete and mail in your warranty page included in this manual. Your warranty is not valid until this product is registered, and must be 

  completed within 30 days of installation. You may register your unit by e-mail to, [email protected]. Type Product Warranty    

  in the subject box, and include in the body of your e-mail: 1. Name 2. Complete Address 3. Phone Number 4. Product Model number and Serial    

  number, 5. Date of Installation. Keep your original sales receipt in case product needs to be serviced.

◊   Proper water balance must be maintained to protect your valuable investment.

◊   Ensure that your

 

CSS 12 unit has been properly installed

◊   Check the Chlorine Generator Cell often; follow Cell Maintenance instructions in this manual located in Section 5

◊   Increase Chlorine Production percentage as warm temperatures increase. 

  (Hot weather conditions make it more difficult to maintain proper chlorine levels)

∆  

WARNING:

  Failure to follow these maintenance instructions, and all other specified operating procedures might void the warranty of this product. 

The Table below summarizes the levels that are recommended by The Association of Pool and Spa Professionals (APSP).  It is important to

maintain these levels in order to prevent corrosion or scaling and to ensure maximum enjoyment of the pool. Test your water periodically. Take a 

water sample in to be professionally tested by a Pool and Spa Professional at least once a month. Be sure to tell your local Pool Store that you

are using a  Complete Sanitation System, Ozone/Salt Chlorine Generator Combination System.

1D  

How Does it Work

Description:

Your

 

CSS 12 System produces both ozone and chlorine. The Ozone Generator produces ozone with light energy, the way the sun does. Therefore, it 

is only emitting pure O3 ozone that has no harmful by-products, unlike other ozone generators that use corona technology which

produce nitrous acid compounds and other harmful byproducts.  Ozone is a molecule of oxygen that is formed when three atoms of oxygen are 

bound together instead of the normal two atoms.  The extra oxygen atom makes ozone the most powerful, naturally occurring oxidizer and sanitizer 

readily available. Pioneers of the original ozone generator cartridge, produced the first Ultraviolet Ozone Generating cartridge in 1977 for the

swimming pool and spa industry.
The O3, naturally produced ozone, generated by the

 

CSS 12

 

System serves as the primary sanitizer and oxidizer, however, a small residual of free 

available chlorine is required at all times to control algae growth and provide a residual sanitizer requirement.
The

 

CSS 12 System provides the necessary chlorine residual for your pool. A measured amount of pool salt is dissolved in the pool water. The 

Chlorine is made by passing a very low voltage electric current through the salt water as it flows through the Cell and back in to the pool.
The

 

CSS 12 System (Advanced Oxidation Processor

) produces and combines ozone and chlorine. These super oxide compounds, even stronger 

oxidizers than ozone or chlorine alone, are injected in to the pool water through a  patented Venturi Bypass Installation process.

While the initial costs of the system may seem sizable, the savings begin immediately. Using your CSS 12, you will eliminate almost all chlorine 

purchases. You will produce chlorine in your own backyard for pennies a gallon. In addition to the cost savings, you have eliminated the need to 

transport and store potent chlorine oxidizers and sanitizers. In most parts of the country, the costs are recovered in three to four seasons.

CSS 12

pH 

 

 

7.2 to 7.6

Alkalinity   

 

80 – 120 ppm

TDS 

 

 

Less than 1,000 Excluding Salt

Cyanuric Acid 

 

30 – 70 ppm

Salt Levels 

 

2500 to 3000 ppm

Free Chlorine 

 

.5 to 1.5 ppm

Calcium Hardness   

60 to 400 ppm

Metals   

 

0 ppm

Nitrates / Phosphates 

<30 ppm

Section 1    

 

 

 

 

 

 

 

 

 

 

        Product Information

◊   Refer to our website for for information on Basic Pool Chemistry at:

www.prozoneint.com/manuals.php

Summary of Contents for CSS 12



















Reviews: