User’s Manual
16
Note
: Select Record and the select Schedule to access the below menu.
SCHEDULE recording options include ALL, CH-1, CH-2,
CH-3…respectively. Please select the option you need to
record according to the schedule, the channel you have
set will be highlighted in “Blue” and channels you have not
set will be “Grey”.
To setup weekly schedules, click on the box of the corresponding time. Choose between
Motion, Continuous, or No Recording and then click on each box in the schedule time line
that you want to apply the select record type to. You can also use the “From – To” pull-down
menus and Copy button to copy settings from one day to another. After you have
completed the schedule, click “Apply” button to save the settings.
You can also click on the Default button to use the system defaults. The system default
settings are:
Alarm all time on = Motion Detection = ON
5.2.3 Hard Disk Management
To manage the installed Hard Disk, click “Main Menu”
“HDD” to enter “HDD MANAGEMENT”. The HDD
Management screen shows the capacity and available
recording time of the installed hard drive and let you
configure whether to overwrite old recordings or stop when
HDD is full.
Select “HDD Format” to format the installed Hard Disk
Drive and erase all recorded files.
Select “U Disk Format” to format the installed USB Disk
Drive by erasing all recorded files on the drive.
To enable your DVR to overwrite old recording files,
choose “ENABLE” at the OVERWRITE field and then click
Apply.
