Proximus Forum Phone 516 User Manual Download

Page: 77 / 156

Special Calls/Functions

Telephoning

Making an announcement with intercom

Responding to an announcement

If you receive an announcement yourself, you will hear a special information
tone.

Briefly

press the MenuCard key and

select

Intercom

Under

Device-ID:

you enter the device-ID of the terminal.

Your system administrator can provide you with the device
ID.

Make your announcement.

For an announcement without intercom

That function requires that your user group has to have
“Announcement accept” authorisation granted by your
system administrator.

To respond, lift the handset or press the hands-free/open-
listening key.

or:

Press the headset key (requirement for headset operation:
headset must be activated, see page 118).

or:

Briefly

press the MenuCard key.

Select

Accept

in the MenuCard

Announcement

For an announcement with intercom

Your telephone switches to the hands-free mode when it
receives the announcement. You can speak with the caller
immediately.

Summary of Contents for Forum Phone 516





























































































































































Search results

Summary of Contents for Forum Phone 516

Reviews:

Related manuals for Forum Phone 516

Brands by name

Popular brands

Proximus Forum Phone 516, User Manual

Search results

Summary of Contents for Forum Phone 516

Reviews:

Related manuals for Forum Phone 516

Brands by name

Popular brands