background image

14

www.prowise.com

© Prowise B.V.

User Documentation Prowise Mobile Lift

Version 2016

4.  Only connect the Mobile Lift to an earthed electrical socket.

5.  Make sure the power cable is not placed in an aisle and that the Mobile Lift is not rolled over the

 

power cable.

6.  The Mobile Lift must be initialized after it has been moved. See 4.2.1 for more instructions.

7.  The Mobile Lift must be initialized after it has not been used for a long time. See 4.2.1 for more

 instructions.

8.  The software includes a safety feature that stops the movement of the Mobile Lift if the display touches 

 

something when it is moving upwards or downwards. Next, the display moves 10 mm in the opposite 

 

direction. Afterwards, the Mobile Lift can be used again, but it must first be initialized. See 4.2.1 for

 

more instructions.

4.2.1 Initializing the lift

Photograph 5: Lift operating buttons

1.  Keep the button pressed until the lift has almost reached the lowest position. 

2.  Release the button. 

3.  Press the button again and keep it pressed. The lift continues to the move to the lowest position. 

• 

Only place the Mobile Lift on a flat and level floor.

• 

Do not place the Mobile Lift in the vicinity of water. Do not place any liquids on or close to 

the Mobile Lift.

• 

Make sure all the ventilation openings are uncovered, so that heat can be released.

Summary of Contents for PW.1.21003 Series




















Reviews: