Version 1.0
Version 1.0
8
Disclaimer
8
PROPERTY REGISTRY Nº 189487
ANY REPRODUCTION IS FORBIDDEN
PROPERTY OF PROWINCH® 2018 - V8.0 ALL RIGHTS RESERVED
PROWINCH LLC COMPANY WITH QUALITY MANAGEMENT SYSTEM
Prowinch® LLC declares that it has made available to the Customer each and every one of the security warnings related to the
purchased product and that, as a result, it does not assume any responsibility for any damages or losses that may be suffered
by the client or third parties. cause or as a direct or indirect consequence of the breach or omission of any of the instructions or
safety warnings contained in the User Manual and Security
Warnings corresponding to the unit purchased.
In this sense, Prowinch® LLC will not be liable for accidents and / or damages to persons and / or property resulting from the
negligent use of the product.
In no case does Prowinch® LLC assume any liability arising from the use of these voluntary recommendations, and does not
offer any guarantee in relation to them. These recommendations do not take precedence over the current safety regulations of
the plant.
For purposes of enforcing the Warranty of the product purchased, Prowinch® LLC, will only be liable for any damage when it is
possible to prove that the user has followed each and every one of the warnings contained in the User Manual and Safety
Warnings.
1. It is the sole responsibility of the Client / User to verify that the acquired equipment, products and accessories comply with
the characteristics,
capacities, elements, components, accessories and other conditions for the use that the Client / user intends to give it.
2. It is also the sole responsibility of the Client / User to ensure that the equipment and products purchased are operated and
maintained in safety conditions and by personnel duly trained in the use thereof, also implementing all the security measures
necessary for prevent accidents or damages to people or property and observing the indications and warnings of the
corresponding manuals of use.
3. The possible support in the selection of the equipment, the capacities and characteristics required by the clients that Prow-
inch provides is delivered free of charge and provided based on the information of use and requirements indicated by the Cli-
ent itself, information that Prowinch does not It may not correspond to verify. In this way, it is in any case the sole and exclusive
responsibility of the Client -or who will use the equipment and products acquired- to ensure that they comply with the capabil-
ities, characteristics, up-to-date maintenance and everything necessary for a
correct and safe operation in relation to the intended use.
4. For personnel lifting Prowinch recommends the use of winches with 4 brakes. The use of winches of 3 or less brakes or safety
features lower than the maximum available, for personnel lifting, is the sole responsibility of the customer.
5. In order to guarantee the safety of the users of the equipment, especially those of Personnel, it is necessary to carry out the
inspections and maintenance of the equipment according to the recommended frequency in relation to its work cycle, as it is
described by the ASME B30 standards. It is mandatory to keep record and evidence the written and photographic reports of:
Maintenance, Start-up, Load Tests, Training, Certifications, Inspections and Reports of failures and accidents.
6. The aforementioned reports must be sent by email to [email protected] within the first 7 calendar days that said event
has occurred.
7. Compliance with the timely implementation of the mandatory activities described in points 6 and 7, plus all the activities
mentioned in the corresponding rules applied, are the sole responsibility of the user. Failure to comply with the foregoing,
releases Prowinch from any type of Liability and Warranty to the team, customer, staff and / or user or any other liability that
could be attributed to Prowinch.
The information contained in this manual may contain technical errors or inaccuracies, Prowinch® LLC, is not responsible for
errors typing, omission or incorrect information.
This manual is subject to change without prior notice. Download the latest version available at www.prowinch.com
Always check www.prowinch.com for latest information regarding this product.
PROWINCH® DISCLAIMER
Summary of Contents for PWR M5 Series
