1 |
P a g e
40 Huntingwood Drive Huntingwood NSW 2148
Phone: (02) 8825 1999 Website:
INSTRUCTION MANUAL
AEROFLOW PERFORMANCE
ENGINE SUPPORT BAR
WARNING!
BEFORE PROCEEDING WITH INSTRUCTIONS PLEASE READ CAREFULLY AND UNDERSTAND BEFORE ATTEMPTING TO USE THIS
PRODUCT.
INTRODUCTION
Congratulations on your purchase of the Aeroflow Performance Engine Support Bar. Aeroflow Performance products cannot and
will not be responsible for any damage, or other conditions resulting from misapplication of the parts described herein.
However, it is our intention to provide the best possible products for our customer, products that perform properly and satisfy
your expectations. Should you have any questions? Please call technical support at +61 2 8825 1900 and have the product part
number on hand when calling.
The Aeroflow Performance Engine Support Bar allows you to hold your engine and transmission in place while you remove your
sub-frame or engine mounts for repairs without removing the engine from the vehicle. It features dual hook assemblies for
increased load balance when working on heavy engines or when removing the transmission or transaxle. This engine support bar
comes with adjustable extension arms, adjustable height set screws and neoprene support pads which prevents slippage as well
as damage to paint. Each engine support bar is adjustable to accommodate most vehicles on the market and a each is supplied
short length of chain.
Load Rated to 500kg (1102lbs)
Adjustable from 750mm (29-
33/64”) to 1450mm (57
-
5/64”).
Summary of Contents for AF98-2065
Page 3: ...3 P a g e...
