Prowinch PWR M5 Series, User Manual

Page: 45 / 95

Specifications
45
Version 1.0
| 45 |
- 44V 60HZ only 6 lines connect into double row terminal block in sets as follows:
K4, K7 @U K5, K8 @V K6, K9 @W Lines K1 - K2 and K3 are separately connected.
Notes:
•
Unused lines must be isolated from ground, properly connected and secured behind double row terminal block.
11.
According to voltage requirement connect lines K1 - K2 - K3 - K4 - K5 - K6 - K7 - K8 and K9 in double row terminal
block as described above.
12.
Ensure connections tightened, unused motor K lines must be isolated from ground and properly connected as
described in point 8
13.
Properly set motor junction box cover.
14.
Remove previous voltage tags and marks on hoist and trolley.
15.
Replace voltage tags and marks with corresponding new voltage selected on hoist and trolley.
16.
Remove lockout/tagout and perform all corresponding inspection and testing as described in ASME B30.16-2 and
ASME B30.17-2
PWR_i and PWR_M5i Series Triple Voltage Double Speed Electric Chain Hoist
1.
Open electric box metal cover.
2.
Locate 12 black lines coming from motor labeled with yellow tags as: High Speed: 6 thicker lines K1 - K2 - K3 - K4 -
K5 and K6. Low Speed: 6 thinner lines K1 - K2 - K3 - K4 - K5 and K6.
3.
Preset black voltage wires/lines connect as follows and repeat for thicker (High Speed) and thinner (Low Speed)
lines: - 220V 60HZ both sets of 6 lines connect into contactors relays in sets as follows:
K1, K2 @U K3, K4 @V K5, K6 @W
- 380V 50HZ and 44V 60HZ both sets of 3 lines individually connect into contactors relays:
K1 @U K3 @V K5 @W Lines K2 - K4 and K6 are separately connected.