Proware SB-1413-UA, Installation And Configuration Manual

Page: 41 / 77

USB and eSATA to SATA II RAID Subsystem
41
Installation and Configuration Manual
3.6 Raid Set Functions
Use the Raid Set Function and Volume Set Function if you prefer to customize your system. User can
manually configure and has full control of the Raid Set and Volume Set setting, but it will take
longer to set up than when using the Quick Create function. Select the Raid Set Function to
manually configure the Raid Set for the first time or to delete existing Raid Set and reconfigure a
Raid Set. The maximum number of RAID Sets that can be created depends on the number of
disk channels in the RAID subsystem. For 4-bay RAID subsystem, four Raid Sets can be created.
3.6.1 Create Raid Set
To create a Raid S et, click on the Create Raid Set link. A “Select The IDE Drives For RAID
Set” screen is displayed showing the IDE drives in the RAID subsystem. Check the “Select”
option to include a physical drive to the current Raid Set. Enter the preferred Raid Set Name (1
to 16 alphanumeric characters) to define a unique identifier for the Raid Set. The default Raid Set
name will always appear as Raid Set # 00 for first Raid Set.
Tick on the Confirm The Operation option and click on the Submit button in the screen. The
Raid Set will start to initialize.