Proware SB-1413-UA, Installation And Configuration Manual

Page: 14 / 77

USB and eSATA to SATA II RAID Subsystem
Installation and Configuration Manual
14
1.3 Technical Specifications
Feature Specification
Form-factor 1U 19-inch rackmount chassis
RAID processor 400MHz storage I/O processor
RAID level 0, 1, 0+1, 3, 5 and JBOD
Cache memory 128MB
No. of Channels (Host and Drive) 2 and 4
Host bus interface USB 2.0 / eSATA
Drive bus interface SATA II (Up to 3.0Gbps)
Data transfer rate
Up to 480Mbits (USB 2.0) / Up to 3.0Gbps
(SATA II)
Back plane board SATA II
Hot-swap drive tray Four (4) 1-inch trays
Power supply 220W power supply w/PFC
Cooling fan 1
Password protection Yes
Audible alarm Yes
Failed drive indicators Yes
Failed drive auto rebuild Yes
Online consistency check Yes
Online expansion Yes
Array Roaming Yes
Online RAID level/ stripe size
migration
Yes
Instant availability and background
initialization
Yes
Environment monitor Yes
Auto spare support Yes
Bad block auto-remapping Yes
Remote management Yes
MAID support Yes
Power requirements
AC 90V ~ 264V full range
6A ~ 3A, 50Hz ~ 60Hz
Relative Humidity: 10% ~ 85% Non-condensing
Operating Temp: 10
o
C ~ 40
o
C (50
o
F ~ 104
o
F)
Physical Dimensions: 44.4(H) x 486.4(W) x 569(D)mm
Weight 7.6Kg (without drives)