iSCSI-to-SATA II RAID Subsystem
User Manual
97
F. MPIO and MC/S Setup Instructions
Here is the instruction to setup MPIO. The following network diagrams are the
examples. Please follow them to setup the environment. Remind that host must have
multi NICs which are set up with different IPs
¾
Network diagram of MPIO.
The MPIO setup instructions are the following:
1.
Create RG/VD, and then attach LUN.
2.
Add the first “Target Portal” on Microsoft iSCSI initiator.
3.
Add the second “Target Portal” on Microsoft iSCSI initiator.
4.
Logon.
5.
Enable
“Enable multi-path”
checkbox. Then click
“Advanced…”
.
6.
Select the first “Source IP” and “Target Portal” to iSCSI data port 1. Then
click
“OK”
.
7.
Logon again.
8.
Enable
“Enable multi-path”
checkbox. Then click
“Advanced…”
.
9.
Select the second “Source IP” and “Target Portal” to iSCSI data port 2. Then
click
“OK”
.
10.
iSCSI device is connected. Click
“Details”
.
11.
Click
“Device”
tab, then click
“Advanced”
.
