iSCSI-to-SATA II RAID Subsystem
User Manual
71
3.8.2 Upgrade
“Upgrade”
can upgrade firmware. Please prepare new firmware file named
“xxxx.bin”
in local hard drive, then click “
Browse
” to select the file. Click “
Confirm
”,
it will pop up a message “Upgrade system now? If you want to downgrade to the
previous FW later (not recommended), please export your system configuration first!”.
Click
“Cancel”
to export system configuration in advance, or click
“OK”
to start to
upgrade firmware.
When upgrading, there is a progress bar running. After finished upgrading, the system
must reboot manually to make the new firmware take effect.
3.8.3 Reset to Default
Enter
“Reset to default”
function, which allows user to reset the controller to the
factory default setting.
Reset to default value, the password is:
00000000
, and IP address to default DHCP.
Default IP address:
192.168.10.50
(DHCP)
Default subnet mask:
255.255.255.0
Default gateway:
192.168.10.254
