iSCSI-to-SATA II RAID Subsystem
34
User Manual
3.3 Quick Install
It is easy to use
“Quick install”
to create a volume. It uses whole physical disks to
create a RG. The system will calculate maximum spaces on RAID levels 0/1/3/5/6/0+1.
“Quick install”
will occupy all residual RG space for one VD, and it has no space for
spare disk. If spare disk is needed, please create RG and VD manually. If some
physical disks are already used in another RG,
“Quick install”
can not be used
because the function is valid only when all physical disks in the system are free.
Step 1:
Select
“Quick install”
then choose the
RAID level
. After choosing the RAID
level, click the
Confirm
button. It will link to another page.
Step 2:
Confirm page. If all setups are correct, click
Confirm
. Then a newly created
VD will be shown.
You can start to use the system now (connect initiator/host to LUN).
In the screenshot above, a RAID 0 RG named “QUICK53542” and a VD named
“QUICK86938”, both of which are named by the system itself, has total
available size of 3725GB.
