
Fibre to SAS/SATA Disk Array
72
User Manual
4.2 Configuration through the LCD Panel
All configurations can be performed through the LCD Display front panel function keys,
except for the “Firmware update”. The LCD provides a system of screens with areas for
information, status indication, or menus. The LCD screen displays menu items or other
information up to two lines at a time. The RAID controller’s factory default password is
set to
00000000
.
Function Key Definitions
If you are going to configure the subsystem using the LCD panel, please press first the
select button.
Parts
Function
Up and Down
Arrow buttons
Use the Up or Down arrow keys to go through the
information on the LCD screen. This is also used to
move between each menu when you configure the
RAID.
NOTE: When the Down Arrow button
is
pressed 3 times, the LCD control will shift to the
other RAID controller (in redundant controller
mode) and the other RAID controller’s IP address
will be shown in LCD.
Select button
This is used to enter the option you have selected.
Exit button
EXIT
Press this button to return to the previous menu.
NOTE: This button can also be used to reset
the alarm beeper. For example, if one disk
drive fails, pressing this button will mute the
beeper.
Summary of Contents for EP-4643S2D2-F8S6
