Proware EP-4643S2D2-F8S6, User Manual

Page: 133 / 151

Fibre to SAS/SATA Disk Array
User Manual 133
5.5.12 Modify Password
To change or disable the Disk Array’s admin password, click on the Modify Password
link under the System Controls menu. The Modify System Password screen appears.
The factory-default admin password is set to
00000000 . Once the password has been
set, the user or administrator can only monitor and configure the Disk Array by
providing the correct password.
The password is used to protect the Disk Array’s configuration from unauthorized
access. The RAID controller will check the password only when entering the Main Menu
from the initial screen. The Disk Array will automatically go back to the initial
screen when it does not receive any command after sometime.
To disable the password, enter only the original password in the Enter Original
Password box, and leave both the Enter New Password and Re-Enter New
Password boxes blank. After selecting the Confirm The Operation option and
clicking the Submit button, the system password checking will be disabled. No
password checking will occur when entering the main menu from the starting screen.
NOTE: The admin Password characters allowed are ‘A’ – ‘Z’, ‘a’ – ‘z’,
and ‘0’ – ‘9’. The minimum number of Password characters is
null/empty (Password is disabled) and maximum number of
Password characters is 15.
5.5.13 Upgrade Firmware
Please refer to Section 6.2 for more information.