NAS System
20
User’s Manual
3.1.2 WebBIOS CU Main Screen Options
The figure below shows the screen when you start the WebBIOS CU and select an
adapter.
In the lower right panel, the logical view part of the screen displays all of the virtual
drives that are configured on this controller. In the upper right panel, the physical
view part of the screen displays the drives that are connected to the controller.
To toggle between the physical view and logical view of the storage devices
connected to the controller, click Physical View or Logical View in the menu on the
left. When the physical view screen is displayed, the lower right panel displays the
drive groups that are configured on this controller.
For drives in an enclosure, the screen displays the drive information in the following
format: (Connector): position: slot. The connector information identifies where the
chain of enclosures is connected to the RAID controller. The position number
identifies the position of the enclosure in the daisy chain.
Directly-attached drives displays in the following format: Slot.
