Proware 3164S1/D1-G1S3, User Manual

Page: 55 / 162

iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual 55
5.3 iSCSI Configuration
“iSCSI configuration” is designed for setting up the “Entity Property”, “NIC”,
“Node”, “Session”, and “CHAP account”.
5.3.1 NIC
“NIC” function is used to change the IP addresses of iSCSI data ports. The iSCSI RAID
subsystem has four gigabit LAN ports to transmit data. Each of them must be assigned
to one IP address in multi-homed mode unless the link aggregation or trunking mode
has been selected. When there are multiple data ports setting up in link aggregation or
trunking mode, all the data ports share single address.
There are four iSCSI data ports on each controller. Four data ports are set with static IP.