ADVANCED KEYS AND BUTTONS
Blade navigation Buttons
are the four directional buttons marked with
arrows and arranged around the
cut
button. They allow you to move the cutting
head up, down, left, or right so you can easily position the cutting head exactly
where you want to start a cut.
Use the
Set Paper Size
key when you are using a paper size smaller than 6” x 12” (15.2
cm x 30.5 cm). Place the paper on the Cutting Mat, aligning it in the lower LEFT corner of the
mat as indicated. Once the paper has been placed on the mat, insert the mat arrow first into
the machine, holding it firmly between the roller bar and the deck. Then press
load Paper
.
Move the cutting blade to the upper RIGHT corner of the paper using the Blade Navigation
Buttons, and then push the
Set Paper Size
key. The size of your paper will appear on the
LCD screen. You can now begin entering your project information.
Foundation
Space
Back
Space
Clear
Display
Reset
All
Repeat
Last
Load
Last
Load
Paper
Unload
Paper
Set
Paper
Size
Sound
On/Off
Sign
Charm
Shift
Shift
Lock
Shadow
Paper
Saver
Real
Dial Size
Shadow
Blackout
Silhouette
Slotted
TIP: Because the maximum cut height is 5.5 inches, and because the Shadow and Shadow Blackout
Features are proportionately larger than the original character, these Features don’t always work when
the Size Dial is set at 5.5 inches. A warning on the LCD screen will appear if you try to cut a character
that will not fit on the paper.
Foundation
Space
Back
Space
Clear
Display
Reset
All
Repeat
Last
Load
Last
Load
Paper
Unload
Paper
Set
Paper
Size
Sound
On/Off
Sign
Charm
Shift
Shift
Lock
Shadow
Paper
Saver
Real
Dial Size
Shadow
Blackout
Silhouette
Slotted
Shadow Blackout Feature
This is the solid version of the Shadow Feature.
When sizing a Shadow Blackout to fit a letter, shape,
or phrase, use the same dial size that was selected on the
base image or original letter. Example: If you’ve cut a 2-inch “A”
and you now want a Shadow Blackout of it, keep the Size Dial set
at 2 inches.
Base Image
Shadow
Shadow Blackout
STOP
Blackout Feature
The Blackout Feature is the solid version of the
base shape. Images from the Doodlecharms
®
car-
tridge are shown here.
Base Shape
Shadow
Blackout
13
EN
GL
ISH
