ProVisual 16000AQH User Manual Download

Page: 77 / 141

5.4.4.4 Login Setting



This function protects any activities of all Manager/User accounts by asking ID and Password prior to the fulfillments.



Select the activities from the list (

)

and click “Apply” to save.

5.4.5 Local Setup

– E-map



Users are able to create E-maps on theirs demands and it enables to monitor the site.



Click Setup

– Local Setup E-Map to register new E-Maps.

5.4.5.1 Registering a New E-map



Please follow the procedure below for registering new E-Maps.

①

Click

“New E-Map” from E-Map List

②

Click

“Load E-Map Image” to apply background image.

③

So as to add devices (Cam, Audio and Alarm) to E-Map, please connect sites from Server List.

④

Drag devices from the connected site into E-Map.

Summary of Contents for 16000AQH














































































































































Search results

Summary of Contents for 16000AQH

Reviews:

Related manuals for 16000AQH

Brands by name

Popular brands

ProVisual 16000AQH, User Manual

Search results

Summary of Contents for 16000AQH

Reviews:

Related manuals for 16000AQH

Brands by name

Popular brands