ProVisual 16000AQH User Manual Download

Page: 24 / 141

Setup

3.7 Login



For security purpose, users have to input

the password to enter the setup menu.



Please press

from Display Menu Bar to enter the setup menu and the following screen will display.



In order to use all functions and privileges, log in as ID: admin.



Default Password is “1111”.



After login successfully, following screen will display.



Main menu consists of 4 sub menu.

SYSTEM / DEVICES / RECORD / RELAY



To escape from the setup menu and save settings of DVRs, please Click Exit button on the screen.



Users may use ,

direction keys or mouse Click to exit from Setup. Please Click (



) the EXIT button on the screen.

NOTE

Press AUDIO/ESC in the setup screen. It operates like CANCEL (ESC). During live mode, AUDIO/ESC button operates as on/off of audio

(focused channel) and playback mode, it operates like EXIT form playback mode or CLOSE (if any popup existing.)

NOTE

Recording does NOT stop by menu accesses.

Summary of Contents for 16000AQH














































































































































Search results

Summary of Contents for 16000AQH

Reviews:

Related manuals for 16000AQH

Brands by name

Popular brands

ProVisual 16000AQH, User Manual

Search results

Summary of Contents for 16000AQH

Reviews:

Related manuals for 16000AQH

Brands by name

Popular brands