ProVisual 16000AQH User Manual Download

Page: 102 / 141

102



Date / Time format: Users can adjust and set the mode of date / time display in accordance with the location.

Date Format: select the date format among YYYY-MM-DD/MM-DD-YYYY/DD-MM-YYYY.

Time Format: select the time format between 24Hours/ 12 Hours AM/PM.



Display Font: Users can change the font of the name and display time of each channel.

Font Type: select the type of font between Arial and Courier.

Font Size: select the size of the font from 10 to 20 and the default is 15.

Color: select the color among 16 different colors.

6.4.2.3 Password Change



Please Click Password Change in setup menu to change the password. This ID and password is for opening the iCMS. This is

not related to any DVR

’s login password



Please select the ID from the drop down list and type original password.



Please type new password and confirm the password below.



If the information is filled out, click ‘OK’ to finish the Password change.

NOTE

This option will be applied after program restarts.

Summary of Contents for 16000AQH














































































































































Search results

Summary of Contents for 16000AQH

Reviews:

Related manuals for 16000AQH

Brands by name

Popular brands

ProVisual 16000AQH, User Manual

Search results

Summary of Contents for 16000AQH

Reviews:

Related manuals for 16000AQH

Brands by name

Popular brands