ProVisual 16000AQH User Manual Download

Page: 137 / 141

137

9.4.2 Schedule Setup (Mandatory)



Click “

Setup>Record>Schedule

” then shows as below.



Check the box

(□) item related to Alarm. ‘Cont Alarm’ is recommended



Click the Time/Date that wishes to activate TEXT-IN function on schedule.



Do the same for additional Text In channel.

9.5 Setup

(Mandatory)



Please Click (



)

“

Setup>Devices>TEXT-IN

”, then users will see the display below.

9.5.1 Text Overlay



A use may choose whether to display the text inputs connected to the rs232 port on OSD screen.



They have 4 menus as followings:

None: any displays on the OSD screen.

Live: displays incoming information from the serial port in real time on the OSD screen.

Record: displays the saved information on the OSD screen during replay.

Both: displays all the information on both Live and Playback mode.

Summary of Contents for 16000AQH














































































































































Search results

Summary of Contents for 16000AQH

Reviews:

Related manuals for 16000AQH

Brands by name

Popular brands

ProVisual 16000AQH, User Manual

Search results

Summary of Contents for 16000AQH

Reviews:

Related manuals for 16000AQH

Brands by name

Popular brands