40
Error Messages and Fixes
错误信息及修复措施
Error
Message
Suggested
Fix
OUTPUT TOO HIGH OR BAD ATOMIZER [1]
输出太高或雾化器损坏
>>>
REDUCE VOLTS / WATTS OR REPLACE
ATOMIZER
调低电压
/
功率或更换雾化器
OUTPUT CURRENT HIGH [2]
输出电流太高
>>>
REPLACE ATOMIZER AND TRY AGAIN
更换雾化器再重试
OUTPUT TOO HIGH [3]
输出太高
>>>
REDUCE VOLTS / WATTS
调低电压
/
瓦特值
TEMPERATURE HIGH [4]
温度太高
>>>
LET COOL AND REPLACE BATTERY
降温并更换电池
TEMPERATURE HIGH [5]
温度太高
>>>
LET COOL AND REPLACE BATTERY
降温并更换电池
OUTPUT FAULT [6]
输出故障
>>>
RETURN FOR REPAIR
送回返修
OUTPUT FAULT [7]
输出故障
>>>
REPLACE ATOMIZER AND TRY AGAIN
更换雾化器再重试
INTERNAL FAULT [8]
内部故障
>>>
RETURN FOR REPAIR*
送回返修
INTERNAL FAULT [9]
内部故障
>>>
RETURN FOR REPAIR
送回返修
BATTERY VOLTS HIGH [10]
电池电压高
>>>
USE CORRECT BATTERY
使用正确的电池
OUTPUT TOO HIGH OR BAD ATTY [20]
输出过高或差的
ATTY
>>>
REDUCE WATTS
降低瓦特数
INPUT QUALITY POOR / BAD - OUTPUT LIMITED [30]
输入质量差
-
输出受限
>>>
CHECK BATTERY, CONTACTS AND SPRING
检查电池,接触和弹簧
LOW INPUT VOLTS DUE TO POOR INPUT QUALITY OR BAD
BATTERY [34]
因为输入质量或电池差造成的输入电压低
>>>
CHECK BATTERY, CONTACTS, AND SPRING
检查电池,接触和弹簧