13
ProVari Radius Components
ProVari Radius
结构
Tanks, cartomizers and atomizers screw into the top plate (1).
Make sure you load these devices with your fluid of choice before attempting to use the Radius.
烟油仓，雾化烟弹和雾化器拧入前盖（
1
）。
在使用
Radius
前，确认设备里已经添加了您选中的烟油。
The top plate (1) is permanently attached to the device. Do not attempt to remove it.
前盖（1）是永久固定到设备上的。不要试图将其拆开
The main Button (2) activates the heating element inside the tank which creates the vapor.
This button is also used to change the user settings on the ProVari Radius. The two smaller buttons are
used to change power settings. There are some shortcuts to turning the device on/off and locking the
adjustment of power using these smaller buttons. We will review these later in this manual.
主按钮（
2
）激活烟油仓内的加热元件来产生烟雾。
该按钮也用于调节
ProVari Radius
的用户设置。两个小按钮是用来改变电源设置的。关闭
/
开启设备和锁定
/
解锁的快捷键组合都要用到这两个小按钮。在后面的篇章里有详细描述。
Main Body (3)
主体（
3
）
The End Plate (4) is removed to install the battery. The Radius was designed to be charged and updated
through the Micro-USB port (7). Should you ever need to change the battery, it is accessed by removing
the End Plate.
拆开后盖（
4
）后放置电池。
要小心避免将后盖螺纹错扣拧进烟管里。
Radius
是可以通过微
USB
接口（
7
）来充电和更新的。如果需要
充电，需要拆开后盖。
Refer to the Battery instructions for more information about charging and installing a battery.
请参考电池操作指南了解如何充电和安装电池的具体信息。
The Window (5) shows the Wattage settings, battery power and other modes as well as error codes in the
event of a malfunction.
窗口（
5
）显示电瓦数设置、电池能量、其它模式以及发生故障时的错误代码。
The bottom plate is held in place with two thumb screws
(6). To access the battery, remove these two screws
and you can replace the battery when needed. Never
tighten the thumb screws too tight when installing.
底部是由两个拇指螺钉（
6
）固定住的。如果要更换电池，
拆下这两只螺钉就可以了。安装时永远不要将螺钉拧得太
紧。
