Page 98 of 126
Proton Products SL mini and SLR mini Series Speed and Length Gauges Instruction Manual - issue 1s
3
Configure the pulse output interface as required and click the “Exit” button when complete:
Label
Value*
Description
Pulse
Resolution
1000
Set the required pulse output resolution in pulses/ unit, where the unit
is the “Measurement unit” (metres, feet
, inch or yards) set on the
“Measurement” page.
100
10
[1]
0.1
0.01
0.001
Pulse 1 2
Mode
[Independent]
Select “Independent” mode to
configure
“Pulse output 1” and “Pulse
output β”
with separate and independent pulse rates.
Quadrature
Select “
Quadrature
” mode to couple together “Pulse output 1” and
“Pulse output β” as a quadrature pair, with pulse rate set under “Pulse
1 rate”.
Pulse 1
rate
1 ~
[1000]
~ 65535
Set the required
pulse rate for “Pulse output 1” in pulses/
unit, where
the unit is the “Measurement unit” (metres, feet
, inch or yards) set on
the “Measurement” page
.
Note
: If the “Pulse Resolution” setting above is
not suitable for the
pulse rate entered here, then the pulse rate will be automatically
rounded up or down.
When “Pulse 1 β Mode” is set to “Quadrature”, this parameter sets the
rate for the quadrature pulse output across both “Pulse output 1” and
“Pulse output β”.
