Proton ICS-1290, Manual

Page: 39 / 115

40
Example
(800000.)
Discard
(886002.)
Enter Data Format
(800002.)
Save
Add Specific Data Format
Step 1.
Scan the
Enter Data Format
barcode.
Step 2. To select an alternative data format 1, please scan the " 1 " barcode in
the appendix to the manual.
Step 3. The terminal type is USB serial (Note: the terminal type is determined
according to the actual situation) and the corresponding terminal type
number is 130. Scan the three digital barcodes in the appendix of this
manual. Scan the “
1 ”, “ 3 ”, “ 0 ” barcodes to indicate USB serial.
Step 4. Select the code 128 to add the data format . In the Symbology Charts ,
find the hexadecimal value of the code system is 6A, and scan the
number corresponding to the 2-digit hexadecimal value in the
Programming Chart of this manual.
Step 5. The maximum length allowed for the specified code 128 is 10, which
is expressed as 0010. Scan the digital barcode “ 0 ”, “ 0 ”, “ 1 ”, “ 0 ” of the
four-digit data length from the Programming Chart .
Step 6. . From the Data Format Editor Commands select the command to be