53
Check Character
No Check Character
indicates that the scanner reads and transmits bar-
code data with or without a check character.
When Check Character is set to
Validate, but Don’t Transmit
, the unit
only reads Code 39 barcodes printed with a check character, but will not
transmit the check character with the scanned data.
When Check Character is set to
Validate and Transmit
, the scanner only reads
Code 39 barcodes printed with a check character, and will transmit this character
at the end of the scanned data. Default = No Check Character.
(9010040.)
* No Check Character
(9010041.)
Validate, but Don’t Transmit
(9010042.)
Validate and Transmit
Message Length
Scan the barcodes below to change the message length. Refer to
for additional information. Minimum and Maximumlengths
= 0-48. Minimum Default = 0, Maximum Default = 48.
(901008.)
Minimum Message Length
Summary of Contents for ICS-1290
