Proton ICS-1290, Manual

Page: 30 / 115

31
Chapter 4 Data Editing
Introduction
This chapter describes how to add prefixes and suffixes.
• Default prefix = None. Default suffix = None.
• A prefix or suffix may be added or cleared from one symbologyor
all symbologies.
• You can add any prefix or suffix from the ASCII Conversion Chart
deplus Code I.D. and AIM I.D.
• Enter prefixes and suffixes in the order in which you want them to appear
on the output.
• When setting up for specific symbologies (as opposed to all
symbologies), the specific symbology ID value counts as an added prefix
or suffix character.
• The maximum size of a prefix or suffix configuration is 200 characters,
which includes header information.