LOADERS AND FEED NECK
LOADERS AND FEED NECK
To achieve the maximum
performance of the SLG™
you will need to use a
motorized loader that force
feeds paintballs into the
SLG™ marker. Using a
slower motorized loader or
a non-motorized loader will
work, but the rate of fire will
be reduced.
To fit a loader onto the
SLG™, tighten your loader
into the adjustable feedneck
using a 5/32” allen key.
Loader should now be held
in with a snug fit.
There is no maintenance
needed for the feed neck
besides keeping it clean of
broken paint, dirt and
debris.
AIR/NITROGEN
OPTIONS AND INSTALLATION
AIR / NITROGEN TANK
OPTIONS AND
INSTALLATION
The SLG™ will only work with
Compressed air or Nitrogen air
systems such as the DYE
Throttle air system. Do not use
CO2 or any other compressed gas.
The output pressure from the air
system has to be between 400 –
850psi.
To install an air system, screw the
tank into the airport as far as it
goes. To remove the air system,
unscrew from the airport. There will
be gas leaking for a few seconds while
you screw the air system out. Notice that
even with the air system removed there
can be gas inside the SLG™ and it can still
fire a paintball. Always treat the marker as
being live and never point it to anything you
don’t intend to shoot.
W
W
W
.
P
R
O
T
O
P
A
I
N
T
B
A
L
L
.
C
O
M
W
W
W
.
P
R
O
T
O
P
A
I
N
T
B
A
L
L
.
C
O
M
17
16
