- 61 -
M a i n t e n a n c e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T e c h n i c a l T r a i n i n g
Dismantling the burner
The burner (gas without the gas manifold) is fixed by 2 screws (by either side of the burner). To access these screws, a long Torx
screwdriver is needed.
Torx screwdriver
Dismantling the gas manifold
The gas manifold is located on the back burner.
To disassemble:
- Unscrew the 2 screws that secure the support of the manifold to the appliance frame
- Unscrew the nut of the gas flow