Proteus PEC 4950 Owner'S Manual Download

Page: 4 / 9

NOTE: SEAT POSITION ADJUSTMENT

TURN ADJUST BAR ( 10 ) CLOCKWISE TO LOOSE THE SEAT STOPPER ( 11 ) FOR SEAT

ADJUSTMENT, THEN TURN ADJUST BAR ( 10 ) COUNTERCLOCKWISE TO FIX THE POSITION.

STEP 5.

ASSEMBLE PEDALS ( 22/23 ) TO THE PROPER PEDAL CRANK CORRECTLY. NOTE

THE PEDALS MARKED "L" OR "R" ON THE END OF IT'S SHAFT, INDICATES PEDALS
MUST BE MOUNTED ON THE " LEFT " OR " RIGHT " SIDE PEDAL CRANK.

STEP 6.

CONNECT MONITOR CABLE A ( 14, FROM END OF #13 MONITOR POST ) AND

MONITOR CABLE B ( 15, FROM MAIN FRAME), THEN FIT MONITOR POST ( 13 ) TO
MAIN FRAME WITH BOLTS ( 3 ) AND WASHERS ( 4 ),

CONNECT MONITOR CABLE A ( 14, TOP OF MONITOR POST ) TO THE MONITOR ( 25 ),

THEN ATTACH MONITOR ( 25 ) TO THE MONITOR PLATE ( TOP OF MONITOR POST )
WITH SCREWS ( 24 ).

NOW THE ASSEMBLY OF THE RECUMBENT CYCLE IS DONE

ADJUST THE LENGTH OF THE SEAT BY THE ADJUST BAR (#10).

TIGHTENED THE ADJUST BAR FIRMLY AFTER ADJUSTMENT.

CORRECT POSTURE FOR PEC-4950

IMPORTANT : READ ALL OF STEPS BEFORE ATTACHING PEDALS.

- 3 -

MANUFACTURER SERVICE

PROTEUS SPORTS INC.

"FOR CUSTOMER SERVICE PLEASE CONTACT THE SALES OUTLET, WHERE YOU PURCHASED
THIS EQUIPMENT, FOR CUSTOMER SERVICE"

Summary of Contents for PEC 4950









