Proteus ATEX Zone 1, Original User Instruction Manual

Page: 44 / 72

44
Version A Mini-Cam Proteus ExZ1
Crawler Connector Lock
For ATEX compliance it is compulsory that the Lock Screw is used.
The Lock Screw prevents the cable connector from becoming loose.
3
Use a 3mm T-Bar to tighten the Lock
Screw, turning in a clockwise direction
as shown.
DO NOT
over-tighten the
Lock Screw.
4 The connection is now complete .
1 Ensure the cable connector and
camera connector are free of dirt,
grease and moisture. Offer the cable
connector to align with the crawler
connector.
2 Tighten the cable connector by
turning in a clockwise direction as
shown.
IMPORTANT!
DO NOT
over-tighten the
Lock Screw as this can
damage the connector.