Proteus ATEX Zone 1, Original User Instruction Manual

Page: 22 / 72

22
Version A Mini-Cam Proteus ExZ1
General Equipment Usage
DO :
• Act upon any system warnings at all times.
• Stay alert and attentive of the system at all times.
• Power ON only when certain the inspection equipment is not in a
Hazardous Environment.
• Regularly test the pressure monitoring system.
• Ensure pressures are adequate before placing inspection equipment in
a Hazardous Environment.
• Purge and re-pressurise only in a NON-Hazardous Environment.
• Use the correct and appropriate equipment for the inspection’s
requirements.
• Switch off if the system shows any signs of any problem.
• Switch off and not use the equipment if it generates excessive heat.
• Stop using equipment in Hazardous Environments if you suspect it might
have become damaged.
• Keep the Operators Manuals always at hand.
• Disconnect or connect components only when powered down.
• Use only the approved wheels and accessories.
• Use only the approved lowering device (for crawlers).
• Check condition of all connectors and ensure they are firmly attached
before use.
• Visually inspect all equipment before use.