Proteus ATEX Zone 1, Original User Instruction Manual

Page: 5 / 72

5
This instruction manual is applicable to the Proteus ™ ATEX Zone 1 Inspection
System.
A standard system and available options are covered by this document. Depending
on your system configuration you may lack some of the features mentioned in this
document.
Disclaimer
Hardware and software mentioned in this document are subject to continuous
development and improvement. Consequently, there may be minor difference
between the information in the document and the performance or design of the
product. Specifications, dimensions and other statements in this document are
subject to change without prior notice.
Mini-Cam Ltd and its suppliers shall not be liable for any damages related to this
software or hardware, or for any other damages whatsoever caused by the use
of or inability to use any Mini-Cam product. This is applicable even if Mini-Cam
has been advised of the damage risk. Under any circumstances, Mini-Cam's entire
liability shall be limited to replace such defective software or hardware that was
originally purchased from Mini-Cam.
Mini-Cam Limited
Unit 4 Yew Tree Way, Golborne, Warrington, Cheshire WA3 3JD.
Phone: +44 (0) 1942 444555
Company Registered in England & Wales & Company Registration No: 3728693