Proteus ATEX Zone 1, Original User Instruction Manual

Page: 12 / 72

12
Version A Mini-Cam Proteus ExZ1
Introduction
Scope of this Operators Manual
Mini-Cam equipment falls into the following classes:
NON-ATEX
is not approved for Hazardous Environments, and usable only
where there is deemed no possibility of Hazardous Environment.
ATEX-2 is approved for use in ATEX Zone 2 Hazardous Environments.
The equipment is self-monitoring, and provides warnings to the user, but
does not automatically remove inspection equipment power in the case
of a problem.
ATEX-1 is approved for use in ATEX Zone 1 (and Zone 2) Hazardous
Environments. The equipment is self-monitoring, and provides warnings to
the user, and will automatically remove inspection equipment power in the
case of a problem.
This Operators Manual describes the ATEX-1 system requirements and operations.
For descriptions of all the additional system functionality and features outside of
ATEX, please refer to the
Proteus Original Instruction Manual .
Use of this Operators Manual
This Operators Manual is an addition to the Proteus Original Instruction Manual ,
with which it must be read in conjunction.
This manual contains important procedures and instructions which must be
followed, particularly when using the ATEX-1 equipment. You must comply with
the contents of this manual plus the
Proteus Original Instruction Manual .
All Operators are required to have in-depth knowledge of these manuals before
using Mini-Cam equipment. The manuals contain important information about
how the system works and the information the system provides. Understanding
and following these will minimise operational risks and help prolong the life of
the system.
If Anything is not Clear
If you are unsure at all of any area of usage of Mini-Cam equipment, please contact
your designated Mini-Cam Service Centre, see:
www.minicam.co.uk/partner-dealers