03
04
INTRODUCTION
SPECIAL FEATURES
Please read this entire operating manual completely and attentively before using
this product, as it covers a wide range of information on operating and safety.
The unit is simple to use, but the operation of a sophisticated automatic charger/
discharger such as the Prodigy 610 Duo does require some knowledge on the part of
the user. These operating instructions are designed to ensure that you quickly
become familiar with its functions.
It is therefore important that you thoroughly read the Operating Instructions and Warning
and Safety Notes before you attempt to use your new automatic charger for the first time.
We hope you have many years of pleasure and success with your new battery charger.
The Prodigy 610 Duo employs the circuit that features dual output power of 200 watts each.
Total output power are 400 Watts. Each output can charge or discharge up 18 cells
of NiCd/NiMH or 6 series of Lithium batteries with maximum current of 10A. Prodigy 610
Duo has an individual cell voltage balancer, so it does not required any balancer
separately when charging Lithium batteries (LiPo/LiIon/LiFe) for voltage balancing.
More reliable/durable capacitive touch systems are using for charger controls. With no
moving parts to wear out, the wear and tear issues which plague conventional switches
are inherently eliminated. Additionally, because capacitive touch buttons are mounted
behind solid substrates, user and environmental abuse become a non-factor.
The three capacitive touch buttons and the Select Wheel are multi-function charger
controls, as indicated by the printed legends. The Select Wheel has three functions:
1. Rotate to the right: This action change the functions of charger or increase the value
of charger s parameters.
2. Rotate to the left: This action change the functions of charger or decrease the
value of charger s parameters.
3. H or button pressed in produces a continuous change. Holding the
button pressed in for a long period accelerates the rate of change.
The fan cooling system is so smart and efficiently. The fan speed is controlled by
internal temperature sensor.
Please BE SURE to read these instructions and Warning and Safety Notes before
you use the charger for the first time.
It can be dangerous to mis-handle batteries and battery chargers, as there is
always a risk of batteries catching fire and exploding.
Set contents
Special Features
Optimized operating software
The Prodigy 610 Duo features the so-called AUTO function that set the feeding current
during the process of charging or discharging. Especially for Lithium batteries, it
can prevent the overcharging which may lead to an explosion due to the user's
fault. It can disconnect the circuit automatically and alarm once detecting any
malfunction. All the programs of this product were controlled through two way
linkage and communication, to achieve the maximum safety and minimize the
trouble. All the settings can be configured by users!
Internal independent lithium battery balancer
The Prodigy 610 Duo employs an individual-cell-voltage balancer. It isn’t necessary to
connect an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, the Prodigy 610 Duo can monitor and balance each
cell of the battery individually. Error message will be indicated and the process
will be ended automatically if the voltage of any single one cell is abnormal.
1. Prodigy 610 Duo Charger
5. Temperature Probe
2. XH Adaptor x 2Sets
6. Crocodile Clip Charging Cable
3. Charger Monitor Program Disk
7. 18AWG Wire Charging Cable x 2Pcs
4. USB Cable
8. Plug-in Battery Clamps
