background image

 

Page 21 

 

Comments & Feedback 

 
We thank you for taking the time in reading and following the new version of our instructions. This 
instruction guide has been compiled from comments and feedbacks received from previous / 
existing customers who are familiar with our automation and had followed the old version (also 
included alongside with this guide). The aim of this guide is to appeal to all “walks” of life - from end 
users to Tradesmen. We understand that not everyone can follow complex wiring diagrams and 
often instructions can be over complicated. We, at Gate Motors, feel that a “one size fits all” guide, 
with simple straight forward jargon-free would benefit the customer & installers alike and promote 
safe operation of the automation. 
 
Your feedback is valuable to us to help us with continued development and fine tuning of our 
instructions to suit customers’ needs.  
 
If there is a subject or topic relating to the control board and its functions that you feel we could 
include, re-write or present in a different way, please let us know by email on 

[email protected]

.    

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Author: - G. Opie 
Published: - September 2011 
 
 

For more information on GateMotors full line of automatic gate openers and access controls visit our website at 

www.gatemotors.co.uk

 

Phone Sales Lines

 

UK:  

 

01202 717191  

 

 

Outside UK: 

(+44)1202 717191 

 

Phone Technical Lines

 

UK: 

0905 235 1700

* (service available 8:30am to 5:30pm Monday to Friday only, closed Weekends and Public Holidays) 

ROI: 

156 099 9667

** (service available 8:30am to 5:30pm Monday to Friday only, closed Weekends and Public Holidays) 

Email: [email protected] 
 

*UK calls to this number are billed by the second and cost £1.02 per minute from a standard landline; other networks charges may also apply. 
 **IRISH calls to this number are billed by the second and cost €1.25 per minute from a standard landline; other networks charges may also apply.  
Service is provided by Digital Select Ltd, 271 Regent Street, London, W1B 2ES whose helpline number is 0844 448 0165  

Trading address: GateMotors UK, Unit 16c, Chalwyn Industrial Estate, St. Clements Road, Poole, Dorset. BH12 4PE.   

GateMotors 

is the trading name of Screwjack Limited - registered office at  21 Oxford Road, Bournemouth, Dorset. BH8 

8ET.  Registered # is 4287804,  VAT #:785 3450 06

 

Summary of Contents for Diamond 3Ti






















Reviews: