Page 13
To ensure your dimensions for mounting is correct:
Dimension B:
Use tape measure to calculate distance from hinge to the required hole on the pillar
bracket and mark accordingly.
Dimension A:
use tape measure to calculate distance from the chosen hole on the pillar bracket to
the point of contact on your gate leaf where the gate leaf bracket is to be attached and mark
accordingly.
A minimum of 30mm must be allowed from
the edge of the pillar, please include this in
your calculations – Illustrated below:
Pivot Bracket:
Cut pivot bracket to the required holes if necessary. File any lacerated edges to
ensure smooth operation of the motor and fix into position on your pillar as shown below.