background image

 

Page 18 

 

Installation Complete 

 
Now your installation is complete with the fixing of the motors to the gate, please proceed to 
installing the safety devices and other equipment supplied or purchased with your kit to the control 
board. Please carefully follow the Q60AR Control Board instruction guide that accompanies the kit to 
ensure smooth operation of your gate automation. 
 

Warranty  

 

The 12 months Limited Warranty on all goods supplied by GateMotors is on a return for repair basis. 
Any longer warranty issued by a manufacturer will require these to be returned to the 
manufacturer’s head office or service address, in or outside the United Kingdom. GateMotors shall 
not be liable in any way for failure of any product supplied.  
 
In particular GateMotors shall not be liable for labour costs involved in replacing faulty items or fault 
finding. GateMotors warrants to you that the supplied goods will be free from defects in 
workmanship and materials under normal use for a period of one (1) year from the date that the 
goods were first purchased by you. If a defect arises and a valid claim under this Limited Warranty is 
received by GateMotors after the first one hundred and eighty (180) days of the warranty period, 
GateMotors is entitled to charge you for any reasonable shipping and handling costs made in 
connection with the repair or replacement of the goods. You must comply with any other return 
procedures stipulated by GateMotors, if any. What this warranty does not cover - The Limited 
Warranty does not apply when the goods have been opened or repaired by someone not authorised 
by GateMotors and does not cover repair or replacement of any goods or part thereof damaged by: 
misuse, moisture, liquids, proximity or exposure to heat and accident, abuse, non-compliance with 
the installation and/or usage instructions supplied with the goods, neglect or misapplication. Any 
disfigurement / removal / tampering of any labels attached to the product, will invalidate the 
warranty. The Limited Warranty does not cover physical damage to the surface of the product or 
calibration of the product. This Limited Warranty cannot be transferred to any other person. This 
Limited Warranty does not affect any legal rights under applicable national legislation governing the 
sale of consumer goods. 
 

Obtaining Repairs & Replacements 

 

(In warranty & out of warranty) Goods should not be returned for repair or warranty claim without 
first obtaining a Returns Authorisation Number (RAN) failure to obtain a RAN will result in the 
returned goods being turned away from our Goods-In and returned to the invoice address as 
undeliverable. In addition, goods returned for repair or warranty claim must be accompanied by a 
note indicating the nature of the suspected defect, showing clearly the returnee's full name and 
address and giving proof of purchase from GateMotors. All goods returned to us for repair or 
warranty claim will be inspected and repaired / replaced as necessary. In warranty repairs will not 
carry any parts or labour charges, provided the products were found to be faulty due to component 
failure. Out of warranty repairs will be subject to charges which cover the labour, replacement 
components and carriage. We will excise a Lien as described above, where payment for goods or 
services has not been made. Where we deem a repair to be uneconomical, we will contact you for a 
decision on our course of action. 

 
 
 
 
 

Summary of Contents for Diamond 3Ti






















Reviews: