protech PS8852, User Manual

Page: 57 / 121

Chapter 3 Software Configuration
PS8852 USER
′
S MANUAL
Page:3-17
3. Install Drivers
SATA Support installation needs floppy device and copy
D:\Driver\SATA\VASRAID6153S from CD to the floppy disk as
connection USB floppy drive.
After you set ATA mode or RAIDm1 mode in BIOS, the next step is to install
the driver in your system. The following sections lead you to install the driver
by your requirement.
Installing the driver in a new Windows environment
When you have a new system and you will install Windows operation system
into the SATA hard disk, please refer to
3-1. Installing the driver in a new
Windows environment and follow the steps.
3-1. Installing the driver in a new Windows environment
As your system is purely a new system and you would like to install Windows
operation system into the SATA hard disk, please follow the following steps.
These sections describe the VASRAID 6153S driver installation in a new Window
system used with various Windows operation systems. Please choose the below
section and follow according to your environment.
„
3-1-1. Installing In Windows 2000
„
3-1-2. Installing In Windows XP
„
3-1-3. Installing In Windows XP x64