Protech Systems MP-1060, User Manual

Page: 61 / 140

Chapter 6 Command List
MP-1060 USER
′
S MANUAL
Page:6-17
ESC L
[Name] Select page mode
[Format]
ASCII ESC L
Hex. 1B 4C
Decimal 27 76
[Range] N/A
[Description]
Enabled only when input with the top of line.
Invalid when input by page mode.
Returns to standard mode after the following commands are issued.
a. FF (Print and recover to page mode)
b. ESC S (Select standard mode)
Character expansion position has the starting point specified by
ESC T (Character print direction selection in page mode) in the
printing region designated by the ESC W (Set print region in the page
mode) command.
This command switches the settings for the following commands
the values of which can be set independently in standard mode and
page mode to those for page mode
a. Set space amount: ESC SP, FS S
b. Set line feed amount: ESC 2, ESC 3
The following commands are enabled only when in page mode.
a. ESC V :Specify/cancel character 90 degree clockwise rotation
b. ESC a :Position alignment
c. ESC { :Specify/cancel upside-down printing
d. GS W :Set print region width
The following command is ignored in page mode.
a. GS (A :Test print
The following commands are invalid in page mode.
a. FS p :Print NV bit image
b. FS q :Define NV bit image
c. GS v 0 :Print raster bit images
d. GS L :Set left margin
Recover to standard mode using ESC @ (initialize printer).