Protech Systems MP-1060, User Manual

Page: 66 / 140

Chapter 6 Command List
MP-1060 USER
′
S MANUAL
Page:6-22
ESC W xL xH yL yH dxL dxH dyL dyH
[Name] Set printing area in page mode
[Format]
ASCII ESC W xL xH yL yH dxL dxH dyL dyH
Hex. 1B 57 xL xH yL yH dxL dxH dyL dyH
Decimal 27 87 xL xH yL yH dxL dxH dyL dyH
[Range]
0 ≤ xL, xH, yL, yH, dxL, dxH, dyL, dyH ≤ 255
However, this excludes dxL = dxH = 0 or dyL = dyH = 0
Initial Value xL = xH = yL = yH = 0
[Description]
Sets the print region position and size.
Horizontal direction starting point [(xL + xH x 256) x basic
calculated pitch]
Vertical direction starting point [(yL + yH x 256) x basic calculated
pitch]
Horizontal direction length [(dxL + dxH x 256) basic calculated
pitch]
Vertical direction length = [(dyL + dyH x 256) basic calculated
pitch]
(X+Dx-1)<576 (3 inch,basic calculated pitch=1);(X+Dx-1)<432 (2
inch,basic calculated pitch=1)
(Y+Dy-1)<768 (basic calculated pitch=1);
If (horizontal starting po printing area width) exceeds the
printable area, the printing area width is automatically set to (horizontal
printable area - horizontal starting position).
If (vertical starting po printing area height) exceeds the
printable area, the printing area height is automatically set to (vertical
printable area - vertical starting position).