Protech Systems MP-1060, User Manual

Page: 59 / 140

Chapter 6 Command List
MP-1060 USER
′
S MANUAL
Page:6-15
ESC D n1…nk NUL
[Name] Set horizontal tab position
[Format]
ASCII ESC D n1...nk NUL
Hex. 1B 44 n1...nk NUL
Decimal 27 68 n1...nk NUL
[Range]
1 ≤ n ≤ 255
0
≤
k
≤
32
[Description] Sets horizontal tab position
n specifies the column number for setting a horizontal tab position
from the left margin or the beginning of the line.
k indicates the number of horizontal tab positions to be set.
ESC E n
[Name] Turn emphasized mode on / off.
[Format] ASCII ESC E n
Hex. 1B 45 n
Decimal 27 69 n
[Range] 0
≤
n
≤
255
Initial Value n = 0
[Description] This command turns emphasized mode on or off by toggling the least
significant bit of n like following.
When the LSB of n is 0, emphasized mode is turned off.
When the LSB of n is 1, emphasized mode is turned on.
ESC G n
[Name] Turn double-strike mode on/off.
[Format] ASCII ESC G n
Hex. 1B 47 n
Decimal 27 71 n
[Range] 0
≤
n
≤
255
Initial Value n = 0
[Description] Specifies or cancels double printing.
Cancels double printing when n = <*******0>B.
Specifies double printing when n = <*******1>B.
n is effective only when it is the lowest bit.
This printer is not capable of double printing, so the print is the same
as when using emphasized printing.
This command is enabled for ANK characters
ESC J n
[Name] Print and feed paper.
[Format] ASCII ESC J n