Protech Systems MP-1060, User Manual

Page: 46 / 140

Chapter 6 Command List
MP-1060 USER
′
S MANUAL
Page:6-2
6-1 Standard Commands
Control
codes
Hexadecimal
codes
Function Standard
mode
Page
mode
<HT> 09 Horizontal tab
○ ○
<LF> 0A Print and line feed
○ ○
<FF> 0C Print and recover to standard
mode (in page mode) Ignored
○
<CR> 0D Print and carriage return
○ ○
<CAN> 18 Cancel print data in page mode Ignored
○
<DLE EOT> 10 04 Real-time status transmission
○ ○
<DLE ENQ> 10 05 Real-time request to printer
○ ○
<DLE DC4> 10 14 Real-time output of specified
pulse
○ ○
<ESC FF> 1B 0C Print data in page mode Ignored ○
<ESC SP> 1B 20 Set right-side character spacing ○ ○
<ESC !> 1B 21 Select print mode(s) ○ ○
<ESC $> 1B 24 Set absolute print position. ○ ○
<ESC *> 1B 2A Select bit image mode ○ ○
<ESC -> 1B 2D Turn underline mode on/off. ○ ○
<ESC 2> 1B 32 Select default line spacing ○ ○
<ESC 3> 1B 33 Set line spacing
○ ○
<ESC => 1B 3D Select peripheral device
○ ○
<ESC @> 1B 40 Initialize printer
○ ○
<ESC D> 1B 44 Set horizontal tab position
○ ○
<ESC E> 1B 45 Turn emphasized mode on/off
○ ○
<ESC G> 1B 47 Turn double-strike mode on/off
○ ○
<ESC J> 1B 4A Print and feed paper
○ ○
<ESC L> 1B 4C Select page mode
◎
Ignored
<ESC M > 1B 4D Select character font
○ ○
<ESC R> 1B 52 Select an international
character set
○ ○
<ESC S> 1B 53 Select standard mode Ignored
○
<ESC T> 1B 54 Select print direction in page
mode
▲ ○
<ESC V> 1B 56 Turn 90 degree clockwise
rotation mode on/off ○ ▲
<ESC W> 1B 57 Set printing area in page mode ▲ ○
<ESC \> 1B 5C Set relative print position ○ ○
<ESC a> 1B 61 Select justification
◎
▲
<ESC c 3> 1B 63 33 Select paper sensor(s) to
output paper-end signals ○ ○