Protech Systems BA-2501 User Manual Download Page 91

Page: 91 / 146

Chapter 5 BIOS Setup

BA-2501 SERIES USER MANUAL

Page: 5-14

5.4.5 Advanced – ACPI Settings

Menu Path

Advanced > ACPI Settings

The

ACPI Settings

allows users to configure relevant ACPI (Advanced

Configuration and Power Management Interface) settings, such as enable/disable

Hibernation, ACPI Sleep State, lock legacy resources and S3 Video Repost.

ACPI Settings Screen

BIOS Setting

Options

Description/Purpose

Enable Hibernation - Disabled

- Enabled

Enables or Disables System ability to

Hibernate (OS/S4 Sleep State). This option

may be not effective with some OS.

ACPI Sleep State

- Suspend Disabled

- S3 (Suspend to

RAM)

Selects the highest ACPI sleep state the

system will enter when the SUSPEND button

is pressed.

Lock Legacy

Resources

- Disabled

- Enabled

Enables or Disables Lock of Legacy

Resources.

S3 Video Repost

- Disabled

- Enabled

Enables or Disables S3 Video Repost.

Summary of Contents for BA-2501



















































































































































Search results

Summary of Contents for BA-2501

Reviews:

Related manuals for BA-2501

Brands by name

Popular brands

Protech Systems BA-2501, User Manual

Search results

Summary of Contents for BA-2501

Reviews:

Related manuals for BA-2501

Brands by name

Popular brands