Protech Systems BA-2501 User Manual Download Page 89

Page: 89 / 146

Chapter 5 BIOS Setup

BA-2501 SERIES USER MANUAL

Page: 5-12

BIOS Setting

Options

Description/Purpose

ME Firmware Version

No changeable options Displays the ME Firmware Version.

ME Firmware Mode

No changeable options Displays the ME Firmware Mode.

ME Firmware SKU

No changeable options Displays the ME Firmware SKU.

5.4.4 Advanced – Trusted Computing (option)

Menu Path

Advanced > Trusted Computing

The Trusted Computing allows users to enable/disable BIOS support for security

device. The operating system will now show Security Device. The TCG EFI protocol

and INT1A interface will not be available.

Trusted Computing Screen

BIOS Setting

Options

Description/Purpose

Security Device

Support

- Disabled

- Enabled

Enables or Disables BIOS support for

security device. O.S. will not show Security

Device. TCG EFI protocol and INT1A

interface will not be available.

TPM State

- Disabled

Enables / Disables Security Device. NOTE:

Summary of Contents for BA-2501



















































































































































Search results

Summary of Contents for BA-2501

Reviews:

Related manuals for BA-2501

Brands by name

Popular brands

Protech Systems BA-2501, User Manual

Search results

Summary of Contents for BA-2501

Reviews:

Related manuals for BA-2501

Brands by name

Popular brands